Stotles Alternatives: 9 Tender Search Tools Compared

Compare Stotles alternatives for UK, Irish and global tender search: coverage, published pricing, reviews, and when to stay with Stotles.

Written by

Rob Dickson

Rob Dickson

Ops Lead, AutoRFP.ai

Published
Reading time
15 min

The best Stotles alternative depends on what you need it to do. Tussell suits UK spend and contract research, Tracker Intelligence and Tenders Direct suit UK and Ireland alerts, Bidstats is a low-cost UK search, Mercell and Tendium lean European, and AutoRFP.ai Opportunity Search covers tenders and awarded contracts across around 10,000 procurement portals and carries a tender from search into Go/No-Go and response. Stotles itself stays the stronger pick for UK buyer, pre-tender and contract-expiry intelligence, and its free plan is a fair place to start.

This guide is for suppliers, tender managers and sales teams who already know Stotles and want to compare it before they commit. Vendor facts below are quoted from each vendor’s own pages, checked on 10 November 2026 and linked, so you can see the source. A disclosure: AutoRFP.ai makes one of the tools listed. The list is grouped by job and carries no overall ranking.

What Stotles Covers Today

Stotles is a UK and Ireland public-sector platform that pairs tender search with buyer, contract-expiry and bid tools. Its homepage calls it “the revenue engine for go-to-government teams” (stotles.com, checked 10 November 2026).

Its Sales Studio page lists tender search, pre-tender signals (“Surface intent before the pre-tender”), expiring contracts surfaced 12 to 24 months out, buyer and supplier profiles, decision-maker contacts and framework intelligence. Its Bid Studio page describes bid/no-bid reports, drafting from past answers, a bid library and task tracking. Neither page mentions security questionnaires, DDQs or markets outside the UK and Ireland.

Stotles’ data page states its coverage, checked 10 November 2026:

What Stotles statesFigure
Portals aggregated, “across the UK and Ireland”100+
Tenders and contract awards8M+
Government buyers15K+
Suppliers1.6M+
Buyer contacts3M+
History”back to 2019”
Refresh”every two hours”

Many of these notices start on the free UK portals Stotles aggregates. For guides to each market and portal, see the public tenders hub.

Stotles Alternatives at a Glance

Nine tools follow, grouped by the job each does best. A table of what each vendor states is the place to start.

ToolBest forMarkets as statedPricing as stated
AutoRFP.ai Opportunity SearchTender and awarded-contract search across many markets, then Go/No-Go and responseAround 10,000 procurement portalsSee the AutoRFP.ai pricing page
TussellUK spend, contract and framework researchUKNot published; quote via sales
Tracker IntelligenceUK and Ireland alerts”UK & ROI” on each planNot published; 3-day free trial
Tenders DirectExpert-checked UK, Irish and EU alertsMore than 500 sourcesFrom £1,359 (plan page); 7-day free trial
BidstatsLow-cost UK tender searchUKFree plan; £350 and £800 a year
MercellEuropean tenders where buyers publish on the platformEuropeNot published; 14-day free trial
TendiumNordic and European find-and-bid”European coverage”From 125 EUR a month
JorpexAlerts across 50+ sources on a low entry price50+ sources, many countriesFrom $49 a month; 14-day free trial
Supply2GovA free local-area tier for new biddersUKFree local-area tier (2018 announcement); check current plans
Stotles (reference)UK buyer, pre-tender and contract-expiry intelligenceUK and IrelandFree plan; paid from £99 a month

Why Do Teams Look for Stotles Alternatives?

Teams look elsewhere for four reasons, and each one maps to something the vendors state themselves.

  1. Markets beyond the UK and Ireland. Stotles says it aggregates data “across the UK and Ireland”. A team that also bids in Europe, Australia or the US needs a second source or a wider tool.
  2. Price steps between tiers. Stotles’ pricing page shows Sales Studio from £0 a month, from £99 and from £475, with the highest tier on custom pricing. Teams that outgrow the Free plan weigh the next step against tools with flat published prices.
  3. Award and spend research. Some teams want deep award and spend analysis for account planning, which is Tussell’s lane.
  4. What happens after a tender is found. A bid manager on Capterra UK, writing in January 2022, wished for tools that carry the platform “into the next stages of the procurement process”. Finding a tender is half the work.

The data shows why UK buyer, framework and award intelligence matters. Contracts Finder publishes awards, and about half of them are call-offs from a framework or dynamic purchasing system:

50.5%
of Contracts Finder awards in 2025-26 were call-offs from a framework or dynamic purchasing system.

Source: UK contract awards published on Contracts Finder, FY2025-26,

A supplier who is not already on the relevant framework may not see those opportunities as open notices. Stotles and Tussell both build products around that problem, and a team that sells to UK government often keeps one of them even after it adds a second tool for other jobs.

1. AutoRFP.ai Opportunity Search: Best for Global Search That Carries On Into a Response

AutoRFP.ai is an accuracy-first, AI-native platform that handles RFPs, security questionnaires, and DDQs: it drafts each answer from your team’s approved content and shows the sources behind it. Opportunity Search puts a tender and award search in front of that platform.

Opportunity Search searches tenders and awarded contracts across around 10,000 procurement portals. Semantic search matches what your company does to what a buyer asks for, so a tender can surface even when its wording differs from your keywords. Saved filters keep a search ready, alerts tell you when a new match appears, and award notices show who won a contract before, so you can see when it may come back.

Most tools in this guide stop at finding. Opportunity Search carries on: a found tender moves into Go/No-Go, and Response Generation then drafts each answer from content your team has approved. AutoRFP.ai cites the sources for each answer and flags any question it cannot support for a person to handle, so a bid team works from one platform from search to response. AutoRFP.ai holds a 4.9/5 rating on G2 (verified 3 November 2026).

Where it fits: teams that bid in more than one country, and teams that want search and response in one platform. For markets that say “tenders”, including the UK, Ireland, Australia, New Zealand, Canada and Europe, see tender search.

Where another tool is the stronger pick: UK buyer, pre-tender and contract-expiry intelligence and decision-maker contacts are what Stotles and Tussell are built around, and AutoRFP.ai does not position Opportunity Search as a replacement for that depth.

2. Tussell: Best for UK Spend and Contract Research

Tussell is a UK public-sector market intelligence platform built around awards, frameworks, spend and decision-maker contacts (tussell.com, checked 10 November 2026).

Its plans page invites visitors to “Join over 300 companies” using Tussell. It describes tracking competitors’ contract wins, renewals and framework positions, decision-maker contacts allocated by tier, and anonymised FOI requests, with an API and Salesforce integration as add-ons on the lower tiers. Pricing is not published: the Starter, Plus and Pro tiers go through “Talk to Sales”, and the page says Tussell is available by annual subscription.

Tussell suits teams that plan accounts and size markets. Its pages describe research, not bid drafting. Stotles publishes its own comparison with Tussell, which is worth reading as the other vendor’s view. The practical split is that Stotles leans on tender search and engagement before a notice appears, and Tussell leans on spend and market analysis.

3. Tracker Intelligence: Best for UK and Ireland Alerts From a Long-Running Provider

Tracker Intelligence is a UK and Republic of Ireland procurement intelligence and tender alert service, and says it is “part of the BiP Group” (trackerintelligence.com/plans, checked 10 November 2026).

Each of its four plans (Iconiq, Logiq, Dynamiq and Analytiq) lists “UK & ROI” coverage. Its site describes Opportunity Search, Tender Alerts and Smart Alerts, saved search criteria, contract reminders for renewals and expiries, award data, decision-maker contacts and spend analysis, with an open API on the top tier. Prices are not published. The site offers a “3 Day Free Trial” and a separate free tender search.

Tracker is a sound pick for a supplier that wants alert depth in the UK and Ireland from a provider that has run for many years, with a published feature matrix by plan.

4. Tenders Direct: Best for Expert-Checked Alerts With Published Prices

Tenders Direct is a long-running UK, Irish and EU tender alert service that also sells a bid-writing service, and says it is “part of Proactis Tenders Limited” (tendersdirect.co.uk/pricing-plans, checked 10 November 2026).

It scans “more than 500 sources” and offers search, alerts, Advance Tender Alerts with up to 18 months’ notice of a contract expiry, a Competitor Tracker, an API and an FOI tool. Its pricing page lists three plans, from Premium at £2,319 down to Core at £2,044 and Basic at £1,359, with a “7 day Free Trial”. The page does not say whether those prices are annual or whether they include VAT, so confirm both before you budget. The same page gives the archive length two ways, “over ten years of notices” and “over 7 years of contracts and awards”, so ask which applies to the data you need.

Published prices and alerts checked by people are the reasons teams pick it. Note that it is not the same company as Tracker Intelligence, which is part of BiP.

Bidstats is a UK tender search and award-data site that says it has 80,000+ users (BidStats pricing, checked 10 November 2026).

It publishes four plans. Free includes 5 tender views a day across 3 portals, covering tenders from the last 90 days. Standard is £350 per year, with unlimited views, daily email alerts, awarded contracts and an expiring contracts pipeline covering the last 2 years. Pro is £800 per year, with three seats, 5 years of data and export. The Insights tier is quote only and adds an API, spend and frameworks data, and 10 years of history. The page says extra users cost £150 plus VAT each on the Standard and Pro plans.

Bidstats has the lowest published paid prices of the tools in this guide, plus a free plan, which makes it the natural first step for a small supplier.

6. Mercell: Best for European Tenders Where Buyers Publish on the Platform

Mercell is a European e-tendering platform where buyers publish tenders and suppliers find and bid on them, and it says it has 800,000+ users (mercell.com, checked 10 November 2026).

Its Tender Discovery product offers daily alerts and a 14-day free trial, and its other products cover market intelligence, sales leads and bid support. Pricing is not published. Mercell’s UK pages make no UK- or Ireland-specific coverage claim, so ask Mercell what it covers in your market before you rely on it for UK notices.

The strength is the one buyers give it: because buyers run tenders on Mercell, a supplier can find a tender and submit a bid in the same place.

7. Tendium: Best for Nordic and European Find-and-Bid Teams

Tendium is a Stockholm-based platform for finding, qualifying and bidding on tenders, and its coverage page lists “European coverage” (tendium.com/pricing, checked 10 November 2026).

Its product pages describe Find, Intelligence, a Bid Studio, an AI assistant and Pipelines. The Light plan starts “From 125 EUR/mo”, the Core and Scale plans scale with the number of bids each year on quote, and the page says “Unlimited users always included”. Neither its pricing nor its coverage page names the UK or Ireland, so a UK supplier should ask before assuming coverage.

The strengths are a published entry price, unlimited users, and finding and bidding in one tool, which suits teams that bid across Sweden, Norway, Finland and the wider EU.

8. Jorpex: Best for Alerts Across 50+ Sources on a Low Entry Price

Jorpex is a tender monitoring service that says it is “Monitoring 50+ sources”, including TED, SAM.gov, Contracts Finder, Find a Tender, AusTender and CanadaBuys (jorpex.com, checked 10 November 2026).

Its pricing page lists Starter at $49 a month (one notification profile and one Slack channel), Pro at $149 a month (five profiles and unlimited Slack channels) and an Enterprise tier on custom pricing, each with a 14-day free trial. Alerts go to email and Slack, with Microsoft Teams listed as “soon”. Jorpex also publishes its own comparison with Stotles, which you can read for that vendor’s view.

It suits small teams that want alerts across many countries at a low monthly price.

9. Supply2Gov: Best for a Free Local-Area Tier for New Bidders

Supply2Gov is a tender alerts service from BiP aimed at sole traders and micro businesses (BiP announcement, 18 January 2018).

BiP’s announcement says registration was free, with “free local area coverage” and an option to upgrade to regional opportunities. That page is from 2018 and Supply2Gov’s own site was not reachable when we checked on 10 November 2026, so confirm today’s plans and coverage on its site before you rely on them.

For a business bidding for the first time, a free tier in one local area is a low-risk way to see what public sector opportunities look like.

Free Official Portals: What You Can Do Without Paying

The official portals publish notices directly, so a paid tool adds convenience on top of data that is already open. Find a Tender and Contracts Finder cover UK notices, and eTenders is Ireland’s national tendering website. Our guides explain what each publishes and when to use one instead of the other.

Paid tools add alerts that match your profile, buyer and competitor data, award history, and one search across many portals. A notice alone also does not show every opportunity. Roughly half of the contracts in Find a Tender contract details notices for 2025-26 were awarded without a competitive process:

49.3%
of contracts in Find a Tender contract details notices in 2025-26 were awarded without a competitive process.

Source: UK contracts published on Find a Tender under the Procurement Act 2023, FY2025-26,

AutoRFP.ai Opportunity Search searches around 10,000 procurement portals in one place, so a supplier who starts with the free portals can keep one search as it adds markets.

How Much Does Stotles Cost?

Stotles publishes its plans, and the Free plan covers tender tracking and pre-tenders. These are the plans shown on stotles.com/pricing on 10 November 2026:

PlanPrice as shownWhat the page lists
Sales Studio FreeFrom £0 a monthTender tracking, pre-tenders
Sales Studio BasicFrom £99 a monthUpcoming expiring contracts, closed tenders, live chat support, MCP connector
Sales Studio GrowthFrom £475 a month (book a call)Buyer and supplier profiles, decision-maker contacts, buying intent documents, framework intelligence
Sales Studio ExpertCustom priceMarket analysis suite, multi-team configuration, integration support
Bid Studio FreeFrom £03 AI bid/no-bid reports
Bid Studio GrowthFrom £495 a month15 AI bid/no-bid reports a month, secure bid content library
Bid Studio ExpertCustom priceUnlimited reports and active bid projects

The page also lists a combined bundle. It does not say whether prices are per user or per team, or whether they include VAT. Older prices appear in the page source and on review sites (Capterra UK lists a starting price of £50 a month per user), so prices differ by date and source. Treat the pricing page on the day you buy as the reference.

How the alternatives price is in their entries above: Tenders Direct, Bidstats, Tendium and Jorpex publish figures, and Tussell, Tracker Intelligence and Mercell sell through sales. For AutoRFP.ai, see the pricing page.

What Do Stotles Reviews Say?

Stotles has few public reviews, and the ones that exist are dated. Capterra UK shows 4.8 from 12 reviews, and the reviews visible on 10 November 2026 date from November 2021 to January 2022. G2 shows a Stotles profile with no reviews.

What the Capterra reviewers praise is consistent. A bid manager in November 2021 said it means they “do not have to do multiple searches in several portals”. A head of business development, in January 2022, said the contact information has proven accurate and up to date. The criticisms are mild: a bid manager wanted richer reporting and data export, and the head of business development wanted tools that carry the platform further into the procurement process.

Because the reviews are several years old and Stotles has added products since, use them as background and trial the Free plan to judge the product today. For comparison, AutoRFP.ai holds a 4.9/5 rating on G2 (verified 3 November 2026), as a response platform.

What Happens After You Find a Tender

Finding a tender is half the work: someone still has to decide whether to bid, and then write the response. Most tools in this guide stop at the first half, and Stotles’ Bid Studio and Tendium’s Bid Studio add drafting.

The path from a found tender to a drafted response has four steps:

  1. A search or alert surfaces a notice that matches your saved filters.
  2. An award search shows who holds the contract today and when it ends.
  3. A Go/No-Go review scores fit and risk before you spend time on the bid.
  4. A draft response is written from approved content, with sources shown.

AutoRFP.ai Opportunity Search covers the first two steps, Go/No-Go covers the third, and AutoRFP.ai’s response platform covers the fourth. The platform writes only from content your team has approved, cites the exact sources it used, and hands any question it cannot support to a person to answer: zero hallucination by design. The tender response guide covers what a strong response needs once you have decided to bid.

The video below follows one RFP from the Go/No-Go decision to a first draft, with each answer traced to its source.

How to Respond to an RFP with Claude: Go/No-Go to First Draft
Video transcript

Your RFP has just landed. Now you're wanting to use Claude to respond to that RFP in an effective and efficient manner. I'm gonna show you the crucial five steps you need to take in Claude for responding to your RFP. We're gonna go into setting up your own project with all your company context so that Claude has the right information on how to respond to your RFP. We're then going to go into AI go, no-go, so you can decide even before you start whether you want to bid on that RFP. We're gonna go through looking at the compliance matrix and do you even have a shot against the evaluator's criteria before going in. And then we're gonna go into generating win themes with AI and finally responding to the RFP. This is all so important, and you can actually use Claude skills along every step of the RFP to really nail your output.

And of course, as always, keep the human in the loop and ensure that your answers are accurate, and not only are you going to respond, but help you actually win. My name's Rob Dickson, I'm from AutoRFP.ai, and let's jump into it all. So how to respond to an RFP with Claude. So looking at qualifying, mapping, drafting, and finally getting that information out to your subject matter experts to help you win. Before we go into it, what is a go, no go? Effectively, it's looking into should we bid on this RFP or not. We ran a survey across over 100 winning bid teams with Stargazy, a bid manager community, and what we found is that 71% of teams that win more than fifty percent of their RFPs run a dedicated go, no go step. This is so important, and AI is really great for this. So let's jump into how Claude can help you with this.

But first, I have set up a fake company with a fake RFP for today's video. We have a Claude project. You can see here in setup in Claude or cowork with all the relevant documentation of that company. It has memory, and it has instructions. These instructions you can actually download in the description below and you wanna of course, make them relevant to your company, how you write and everything else. Other documents and context I'd put here is like technical information past RFP responses. If you have a library of historical context, that could be your security documents and policies, it could be your websites, it could be a bunch of like markdown files that are relevant to your company. I would really ensure you have examples of great responses. AI works really well when not only it doesn't have context about your company, but it also has examples of how you would actually respond.

Best way to do that is past RFPs or tenders you have responded to, and make sure that they're labeled correctly, and in your project instructions, point out to those different contexts and when to refer to it. What I'd recommend is almost having a context file called project context map.md and ask Claude to write and list all of the context that you have in the project file. And this can be something that Claude, in its instructions, is pointed to and uses consistently to find the most relevant context. Kinda like a knowledge graph or map for it. Once you've got your project set up, let's get into actually responding to an RFP. So I have my RFP. I go into Claude. I'm gonna use my go, no-go skill. So what your skills are, and every single skill I'm gonna cover off today, you can download in the description below off AutoRFP.ai's website. We have a skill library that is incredibly useful to use across all different kinds of parts of the RFP process, and you can download them all for free

on our website at AutoRFP.ai/skills or in the description below. So what is a skill? Effectively, a skill is just a predetermined instructions for your AI, in this case, Claude, on what it needs to do and steps it needs to take. This includes an overview, includes content. So here's the instructions of the skill, and this one also uses a go, no-go decision framework. So it's a built-in framework and even a spreadsheet file that it can use to then ensure that effectively it's generating consistency, consistent output. Again, you wanna make sure you customize these skills to your organization, and then you can share them across your entire Claude tenant, so everyone can use and share the same skill. So I've invoked this skill. You can generally invoke skills just with a backslash. For instance, AI Go/No-Go. And here I've used the skill, uploaded the RFP, and that's all I need to do. I don't need to worry about some complicated prompt.

Effectively, that skill is my complicated prompt that is saved in my organization, and it repeats and gives Claude a really repeatable way to get me a consistent output. So it's gone through, and it's scaled it as a conditional go at seventy-seven percent, so seventy-seven out of a hundred. The reason is because based off the scorecard of my Go/No-Go decision framework, it's looked at what we need to worry about. It looks at my past contacts or what we've promised to them in the lead-up to the RFP. It's looked at the references here. Are there any named references that are actually relevant to the prospect? So can we win this thing? Have we done this kind of work before? It looks at relevant pricing, and it looks at a whole bunch of other stuff as well, especially around contradicts contradictions and so on. And then it generated me my Go/No-Go analysis report, and then I could bring that to my team, and we can discuss that in detail about whether that is accurate and whether we actually want to proceed with this RFP or not. So that's the important first step.

I have not written a word. I've maybe read the RFP. But before I even go to start writing my, on my blank draft, I've done my Go/No-Go. Once you've done your Go/No-Go, really useful one is then Compliance Matrix Builder. This is, again, another skill that you can download in the description below. And what this does it pr- effectively goes through after the Go/No-Go and checks whether we are gonna meet the compliance. It's gonna give me a mock evaluation score based on that. So anything that I need to look at, it's gone through, given me my project submission instructions what needs attention, and effectively what I need to action. So going in here, I can then see my submission checklist to everything I actually need to do, so effectively my own RFP submission checklist, which is really helpful ensuring the bid gets in on time, works really well in delegating those tasks to different team members, and ensure that we're a clean and efficient team to ensure we get through that. My evaluation criteria, so it's effectively extracted that from

the RFP document and looked at where, what the scoring matrix is. Because effectively, when you write an RFP to win, you don't only need to be compliant, but you need to make sure you achieving maximum marks as possible against their evaluation criteria. And then it's made some observations about the RFP as well as the requirements matrix. So it's exported and shredded that RFP for me and got everything ready to ensure that we can start writing. So we've decided to bid. We know what we need to achieve and do in the RFP. Let's get to writing it, actually winning the thing. That's where our next skills works. So firstly, we wanted to generate win themes. The win theme is what is the unique competitive positioning and reasons behind what we understand about the prospect, so l- putting it in their own language and everything else to ensure about why we're competitive and why we will win this bid.

So for instance, my talent acquisition software, we can look about what they're waiting, so what's important to them. We should-- I also have a lot of information about this RFP 'cause we've done prior conversations with the prospect. Talking about why now, so why are they actually looking to b-build, why are they looking to acquire my solution? Mapping all the stakeholders, so important. What does each stakeholder actually care about? Also very important. It's gone into the competitive field effectively and then it's generated my win themes. Gone into my second theme, consolidate hiring as well, and then gone into my third theme, board-ready numbers and hiring retention. So reporting is important to them. Then what it does is each of those themes that it generates, it maps those themes to the different sections, also take into account the evaluation criteria and everything else. Once we have our themes, then it's actually time to respond to the RFP. You've noticed most teams may start with a blank RFP and straightaway start writing.

I've used AI to do a lot of heavy lifting before that step to ensure that when we actually go to start writing, A, we know we want to bid on it, B, we know we're competitive and have a chance to win, and C, we know why we can win this and what we need to weave into every single respond to win the RFP. That's where Claude is really useful across the entire RFP response process and responding to the RFP to actually get you to win the RFP. So then we go in and effectively it started responding to the RFP, and it's given me the, that output in the prospect's original documents. And then I can go in, I can have a look. And then it's effectively it's started responding to that RFP. I can go down here. It's given me gaps, so like certain things that it can't answer, it's highlighted that. It's gone in to write me an executive summary. It's started responding each of this information. Again, you can see what context it has a gap for.

It actually has a lot of gaps. That gives me an indication I need to strengthen my content library in my Claude project. 'Cause if the AI can't find the answer, we've made sure that this skill for responding to the RFP will actually mean that instead of trying to guess and make something up that could potentially be incorrect, it's instead made sure it's highlighted that it doesn't have the information, and that's for me to go in and respond to So then I've given all that information, it's responded to everything. I would upload this to Google Docs or SharePoint for Microsoft Word, then I would tag the relevant team members and get everyone involved, and we start to respond to this RFP. And then once I've completed, I ensure that I go back to Claude, upload my completed RFP, and make sure that is saved to my context, so the next time we get these questions, it can pull from my completed RFP to then use that information to respond to the RFP. So that's how you can use Claude. I still have a lot of work in front of me, but Claude and a really strong bid process

helped me streamline getting started, get- gotten my first AI draft, generated my win themes, and even before we did all that, it helped me decide whether we want to bid on this and then what we need to do to submit and meet the evaluator's criteria. So I'm Rob from AutoRFP.ai. You can visit our website. We're an AI RFP software. So generally, if you're doing more than, say, thirty bids a year, and winning is incredibly important to your organization, getting accurate and quality responses in to actually win the RFP, you definitely wanna check out AutoRFP.ai. You can visit our website. Our pricing is transparent, and you can book a demo. Where Claude can sometimes fall short, and this is where teams will pick up AutoRFP.ai, is when they have a lot of different team members responding to that RFP. You'll notice in Claude, collaboration is incredibly difficult.

Second, you have content that lives in a lot of different places, and you wanna make sure that can be centralized into your AI content library. Claude, although you can give it information, it's not the best at actually finding the most relevant information. You could see in my completed RFP that it had a lot of gaps, and I said maybe it doesn't have that information, or maybe it did and it just didn't try hard enough to find it. And you'll also find a lot of times when talking to Claude, you might have to ask, "Hey, where did you get that answer from?" Because you're not necessarily confident that it didn't just make it up. Even if you give all the great prompts and skills in place, you wanna make sure that you're still asking it to validate those answers, and occasionally you will get back, "Yeah, you're absolutely right. I made that up." That's where AutoRFP.ai is really strong in that we do AI citations, so every single sentence generated by AI, you can see exactly where it came from. You never have to ask where it came from, and the AI is validating that on every single output. And then secondly, you're not necessarily locked into Claude.

You-- We use all the best models from GPT-6 to Gemini 4 to Sonnet 4.5 and 5.5 And effectively, we use across every single model what they're best at in- across the entire RFP process to help you respond incredibly efficiently, as well as quality responses you can trust that actually will help you win the RFP. So I've been Rob from AutoRFP.ai. In the description below are all the different links for the skills and the proposal win rate report I mentioned at the start. And yeah, hope you have learnt something today about how you can use Claude to help you win RFPs efficiently. Thanks.

Which Stotles Alternative Fits Your Job?

Pick by the job that matters most.

If this matters mostThen consider
UK buyer, pre-tender and contract-expiry intelligence, with decision-maker contactsStotles or Tussell
UK and Ireland alerts from a long-running providerTracker Intelligence or Tenders Direct
The lowest published priceBidstats or Jorpex
European tendersMercell or Tendium
Accuracy and compliance: every response answer written from approved content with its source shownAutoRFP.ai
AI-native tender and awarded-contract search across many markets, with Go/No-Go and response in one platformAutoRFP.ai Opportunity Search
No budgetThe free official portals

Test it on your own tenders in a two-week proof of concept, from the search to a drafted response. Book a demo to see AutoRFP.ai Opportunity Search on the markets you bid in.

About the author

Headshot of Rob Dickson

Rob Dickson

Ops Lead

Ops Lead at AutoRFP.ai. Designs the pipeline, content, and handoff systems bid teams use to run RFPs end-to-end, and co-hosts live sessions on winning workflows.

LinkedIn

Frequently asked questions

Is there a free alternative to Stotles?

Yes. The official portals (Find a Tender, Contracts Finder and Ireland's eTenders) publish notices without a paywall, Bidstats and Supply2Gov have free tiers, and Tracker Intelligence, Tenders Direct, Mercell and Jorpex offer free trials.

Stotles also has its own Free plan, which covers tender tracking and pre-tenders.

Plans change, so check each vendor's page before you rely on a free tier.

Which Stotles alternative covers countries outside the UK and Ireland?

Stotles describes its data as aggregated "across the UK and Ireland" (stotles.com/data, checked 10 November 2026).

AutoRFP.ai Opportunity Search searches tenders and awarded contracts across around 10,000 procurement portals, and every answer in AutoRFP.ai's response platform is written from content your team has approved, with its sources shown.

Mercell and Tendium focus on Europe, and Jorpex lists sources such as TED, SAM.gov, AusTender and CanadaBuys.

Can I use Stotles and another tender tool together?

Yes. Many suppliers pair a UK intelligence tool with a second tool for a different job, such as search across more markets or drafting the response.

Stotles has a Free plan, so trying a second tool next to it costs little to test.

How do I move from finding a tender to responding to it?

Decide whether to bid, then draft from approved content.

AutoRFP.ai Opportunity Search hands a found tender to Go/No-Go, and its response platform then writes each answer from content your team has approved and shows the sources behind it, routing anything it cannot support to a person.

Are Tracker Intelligence and Tenders Direct the same company?

No. Tracker Intelligence says it is "part of the BiP Group", and Tenders Direct says it is "part of Proactis Tenders Limited" (both vendor pages, checked 10 November 2026). They are separate UK tender alert services.

Does Stotles cover the US, Australia or Europe?

Stotles' /data page says it aggregates procurement data "across the UK and Ireland" (checked 10 November 2026). Its pricing and product pages do not list other markets, so ask Stotles directly if you need them.

Next step

See what better answers look like on your RFP.

  1. [01]A 45 minute walkthroughBuilt around the questionnaires your team answers today, not a generic demo.
  2. [02]A free two-week proof of conceptProve it on your own RFPs, with your content and your reviewers.
  3. [03]First answers, cited to your contentAI-drafted answers in as little as 48 hours of bringing your content in.